Neerabup Power station_Location_AUS.png

Neerabup Power Station, Neerabup, Australia

ERM Power is a successful developer, owner and operator of power stations across Australia by leding the development of six power stations representing approximately 5% of Australia’s total power generation capacity. Bilfinger Berger & Baulderstone JV together with Newgen Power and Siemens, entered into an agreement to deliver a new $75 million Gas Fired Power Station located in Neerabup 40km north of Perth. The new Gas Fired Power Station has two(2) Siemens 185MW turbines and delivers 330MW peaking power.

Effective Cooling with Minimum Fuel Consumption

ERM wanted a reputable manufacturer of Quality Industrial Evaporative Pre-Coolers to ensure maximum output and minimal fuel consumption subsequently providing max longevity of Plant and Equipment. A system that provided maximum cooling with the least air resistance and no droplet carry over. Furthermore they wanted a system to cool air to ISO Standards 60°F (15°C) Gas Turbines Output Rating without any Mechanical Cooling needs.

Evaporative Pre-Cooler solution

Munters were engaged by to provide an Evaporative Pre-Cooler solution to the main air intake to the Gas Turbine Generators. The unit is fitted to the main air intake louvers of the generator providing a cost effective solution to meet the needs for cooling without the adverse downstream effects such as pressure loss and corrosion. Water is distributed through the Munters cooling media upstream of the gas turbine inlet at a controlled rate. The inlet air passes through the media and the water is evaporated to a cold vapor, chilling the air that passes to the turbine and increasing power output as well as the operating efficiency.

我们该怎样帮助您?

By selecting you approve our cookie policies

除雾

/sites/default/files/default_images/20191105102856981.jpg

Your Perfect Climate

//vod.munters.cn/8cc75d7728b34bea988c087e429a9439/be325602ddac9d649f8e66a583c2f1e9-sd.mp4

原油、天然气和石油

从勘探到生产、运输、精炼一直到销售,去除、分离液体和污染物始终是原油和天然气工业的基础需求。

发电及配电

高湿度使发电厂和风力涡轮机内发生冷凝、腐蚀和生锈,蒙特设备可防止发电厂和风力涡轮机受到腐蚀,确保其处于理想的室内空气条件,为电力生产创造高效环境。

船舶制造和海运业

对于货物和船舶设施而言,海洋环境可能是非常具有破坏性的。水分和盐会造成严重的腐蚀,冷凝等问题普遍存在。

钢铁工业

从工艺流程中的除雾,到储存时的除湿,蒙特能够提供各种应用方案,助力钢铁行业。