AT_Case_IMG_0695.jpg

Conversion of existing waste heat into cooling with Munters' DesiCool ™ system

The Swedish National Property Board manages 1.6 million m² government buildings and property, including the Swedish seat of the government "rose bath". His job is to manage the building economically, so that the national cultural heritage is preserved for the public and cultural assets are protected. 

The Swedish National Property Board operates its own cooling systems for the "rose bath" building. Since the rise of the internal heat load due to the increased use of computers, the existing cooling system had reached its capacity limit. At the advice of Munters is an innovative alternative to conventional cooling with refrigerant, through the use of existing waste heat with a Munters DesiCool ™ system revealed. 

Munters alternative for cooling

The DesiCool ™ system works and cools in three stages. First, the external air is dried in a desiccant wheel using waste heat. This dry air is then cooled in a downstream heat recovery rotor, resulting in a dry, cool air condition. The air is finally after-cooled in an evaporative cooler to the desired state. The more waste heat is used, the deeper the fresh air can be cooled. During the winter the DesiCool ™ system uses both rotors as series-connected heat exchanger. If both rotors operated at maximum power, the DesiCool ™ system achieved a thermal efficiency of 90%. Thanks to the high efficiency can reheating in the winter time mostly omitted. For the Swedish National Property Board, this means that the reheating of the air that is normally required during the long winter, is not necessary. 

事实浏览

  • Use heat to cool
  • heat & energy recovery
  • High utilization of waste heat
  • No CFC and HCFC s by cold-free system
  • Easy to maintain
  • No fresh air, 100% fresh air
  • Evaporative cooler with Hygiene certificate VDI 6022
  • 60% less CO2 compared to conventional cooling system

我们该怎样帮助您?

By selecting you approve our cookie policies

除雾

/sites/default/files/default_images/20191105102856981.jpg

Your Perfect Climate

//vod.munters.cn/8cc75d7728b34bea988c087e429a9439/be325602ddac9d649f8e66a583c2f1e9-sd.mp4

原油、天然气和石油

从勘探到生产、运输、精炼一直到销售,去除、分离液体和污染物始终是原油和天然气工业的基础需求。

发电及配电

高湿度使发电厂和风力涡轮机内发生冷凝、腐蚀和生锈,蒙特设备可防止发电厂和风力涡轮机受到腐蚀,确保其处于理想的室内空气条件,为电力生产创造高效环境。

船舶制造和海运业

对于货物和船舶设施而言,海洋环境可能是非常具有破坏性的。水分和盐会造成严重的腐蚀,冷凝等问题普遍存在。

钢铁工业

从工艺流程中的除雾,到储存时的除湿,蒙特能够提供各种应用方案,助力钢铁行业。