AT_case_Barf-15ADD.jpg

Munters create extreme test conditions for fighter jets

Munters air drying system helps South Korean test center simulate extreme flying environments.

The American writer Mark Twain once said: "Everybody talks about the weather but nobody does anything about it." But Munters is doing something about the weather which our colleagues in South Korea are proving. Recently they delivered a special installation to condition the air in a big climatic test facility. In these type of rooms, all kinds of climatic conditions can be simulated to which equipment can be exposed. This might be extreme cold or heat, combined with high or low humidity.

The Aviation R&D Centre of the South Korea Agency for Defense Development (ADD) wanted to set up a new "Environmental Testing Facility" (ETF) at Seosan Air Force Base. Because of the recent purchase of F-15K Eagle fighter aircraft, this project was supported by manufacturer Boeing. In this ETF space, F-15K's, but also other flying and rolling equipment, will be submitted to harsh climatic conditions. Munters Korea was invited to control the humidity in this facility, based on outside conditions ranging from -18°C to +35°C and a humidity from 20-100% RH. To guarantee the desired inside conditions, the dehumidification system has to be able to produce a dewpoint of -40°C at 12,000 m³/h or -28°C at 25,500 m³/h.

Munters Korea solved this problem by using a special steam regenerated dehumidifier with additional pre and post cooling. The system is designed to work continuously 24/7 or intermittent. In this way, the desired climate conditions are guaranteed around the clock, and tests on any equipment can be performed flawlessly.

事实浏览

  • Fully controlled climate conditions independent of outdoor fluctuations
  • Different running modes for various loads
  • Reproducible conditions
  • Accurate temperature and humidity control
  • Avoiding condensation problems

我们该怎样帮助您?

By selecting you approve our cookie policies

除雾

/sites/default/files/default_images/20191105102856981.jpg

Your Perfect Climate

//vod.munters.cn/8cc75d7728b34bea988c087e429a9439/be325602ddac9d649f8e66a583c2f1e9-sd.mp4

原油、天然气和石油

从勘探到生产、运输、精炼一直到销售,去除、分离液体和污染物始终是原油和天然气工业的基础需求。

发电及配电

高湿度使发电厂和风力涡轮机内发生冷凝、腐蚀和生锈,蒙特设备可防止发电厂和风力涡轮机受到腐蚀,确保其处于理想的室内空气条件,为电力生产创造高效环境。

船舶制造和海运业

对于货物和船舶设施而言,海洋环境可能是非常具有破坏性的。水分和盐会造成严重的腐蚀,冷凝等问题普遍存在。

钢铁工业

从工艺流程中的除雾,到储存时的除湿,蒙特能够提供各种应用方案,助力钢铁行业。